PCB Design Tutorial for Eagle


PCB Design Tutorial for Eagle



This is a PCB design tutorial that I designed as a simple way to learn how to create a PCB layout in Cadsoft Eagle. What we need:

(If you want to use the same schematic as used in this PCB tutorial you can download the schematic here. You can also find three simple electronic circuits with schematics, board layout and Gerber files here.)

Create Board From Schematic

We start by opening our schematic diagram in Eagle. Click on the “Board” button (or choose “Switch to board” from the “File” menu) to create a board for this schematic.You can also use the command line for selecting commands.

If no board exists, we will get a warning asking us to create a new board. Choose “Yes”. A new board will be created with all the components from the schematics.

Place Components

We choose the “Move” action from the toolbar (or the “Edit” menu) to place the components on our board. A good way to arrange our components is to place them similar to the placement in the schematics. This makes it much easier to troubleshoot the circuit at a later stage if needed.

Click on “Rastnest” from the “Tools” menu to update the yellow airwires.

Start Routing

Alright, now the routing fun begins :)

Routing can be done manually or automatic. Here I will explain how to do it manually. You can also read about how to use Eagle’s autoroute function.

Choose “Route” from the toolbar (or from the “Edit” menu). Select 12 mil trace width and 24 mill drill size.

A rule-of-thumb is to use wide traces for nets that draw a lot of current, for example your power lines. For other nets, we can use thinner traces. In this example, not much current is drawn by the circuit, so we just choose some default values.

We start routing by clicking on one of the yellow airwires. A trace appears with a color corresponding to the current routing layer. Now we use our left mouse button to route the wire to where the airwire points us.

If we want to change the routing layer, we simply click the middle mouse button or use the layer selector on the toolbar. A good rule-of-thumb for a two-layer board is to route only horizontally on one layer and only vertically on the other. But this is not necessary for such a simple board as ours.

Learn more about PCB design guidelines.

To simplify routing, a ground plane can be added.

Completed PCB Design Tutorial Board

Run ERC and DRC To Check For Errors

When we are finished routing the PCB, we should always run ERC and DRC from the “Tools” menu to look for errors. Fix any errors if present.

When there are no more errors, we have finished the PCB design tutorial. Let’s give ourselves a pat on the back! Now we are ready to create gerber files that we can send to a manufacturer for fabrication.